304/316/430 Stainless Steel Sheet #4 Finish
304/316/430 Stainless Steel Sheet #4 Finish
Product Description
304/316/430 Stainless Steel Sheet #4 Finish：
304 Stainless Steel Finish #4 is ideal for decorative purposes such as wall cladding, elevator interiors, kitchen equipment, and other applications where a low-reflective and uniform appearance is desired. It is also used in industries such as automotive, aerospace, and marine, where it provides a durable and corrosion-resistant surface. Satin stainless steel is available in various grades of stainless steel, including 304, 316, and 430, and in a range of thicknesses and sizes to suit different design requirements.
Number 4 finish stainless steel, commonly referred to as “satin” finish, is the most popular choice for architectural applications.
304/316/430 Stainless Steel Sheet #4 Finish Specification：
| Grade |
201, 304, 316L , 430 |
| Surface finish | NO.4, #4, Stain Finish |
| Color | Golden, Rose Golden, Bronze, Rose Red, Wine Red, Blue, purple, Black, Green,etc. |
| Thickness | 0.5mm-3.0mm or customized |
| Width | 1000mm, 1219mm or customize |
| Length | 2000mm, 2438mm, 3048mm or customize |
| Standard size | 4'*8ft'(1219*2438mm), 4*10ft(1219*3048mm), 1000*2000mm |
| Technique | Cold Rolled Stainless Steel |
| Package | PVC protective film+wooden Pallets with waterproof paper and steel strip or as requirement |
| Delivery time | 15 days after confirming deposit |
| Paymentterms | T/T, L/C |
| Application | Building Interior Exterior Decoration, Partition Screen, Door, Elevator, Lift , Wall Decoration, Cover Panel, Table or decorative surface |
| Standard | AISI, GB,SGS |
| Origin | BAOXIN, POSCO, TISCO |
| Note | We can provide other sizes , pattern and color by customers' requirement |
| Others | We also manufacture tube and pipe, Show Shelf, Handle, Handrail, Door, Elevator Cab, Kitchenware, Sanitary Ware etc. with good looking and different color for your option. |
Chemical Composition:
Grade |
Chemical Composition (%) | |||||||
| C | Si | Mn | P | S | Ni | Cr | Mo | |
| 201 | ≤0.15 | ≤1.00 | 5.5/7.5 | ≤0.060 | ≤0.030 | 3.5/5.5 | 16.0/18.0 | - |
| 304 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 8.0/11.0 | 18.00/20.00 | - |
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 10.00/14.00 | 16.0/18.0 | 2.00/3.00 |
| 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 10.00/14.00 | 16.0/18.0 | 2.00/3.00 |
Faq:
1. What is Satin Finish?
Satin stainless steel is a type of finish that is achieved by mechanically polishing the surface of stainless steel to create a consistent and even grain pattern. The satin finish is similar to the hairline finish, but it has a slightly more reflective appearance and is less textured than the hairline finish.This finish has a low-reflective appearance that is less reflective than a mirror finish.
2. How does No.4 stainless steel differ from other finishes, like No.8 or mirror finish?
No.4 stainless steel has a brushed satin appearance with a non-reflective finish. In contrast, No.8 or mirror finish stainless steel has a highly reflective and mirror-like surface. The choice between the two finishes depends on the desired aesthetics and the level of reflectivity needed for the specific application.
3. How do I clean and maintain No.4 stainless steel with a satin finish?
To clean No.4 stainless steel with a satin finish, use a mild soap or detergent and warm water with a soft cloth or sponge. Avoid using harsh abrasives, steel wool, or scouring pads, as they can scratch the surface. After cleaning, rinse thoroughly with clean water and dry with a soft cloth to prevent water spots or mineral deposits.
