JGS1 ultra-small area UV quartz plate 0.5-0.8mm
JGS1 ultra-small area UV quartz plate 0.5-0.8mm, we can provide quartz glass plates/sheets with lengths from a few millimeters to more than 1000mm according to your requirements. Depending on the field of application, we produce panels in various materials. Feel free to contact us anytime.
Product Description
The formation of sheet is the result of the high temperature viscosity of its melt. Optical quartz plate is used to make semiconductors, electric light sources, semiconductor communication devices, lasers, optical instruments, laboratory instruments, electrical equipment, medical equipment It is widely used in high temperature and corrosion resistant chemical instruments, chemical industry, electronics, metallurgy, building materials and national defense industries. UVC quartz sheet is transparent in the ultraviolet and visible spectrum range; there is no absorption band in the range of 185-2500nm; at 2600 There is a strong absorption band in the range of -2800nm; non-luminous, stable light radiation. is an optical quartz glass melted with high-purity hydrogen and oxygen, so JGS1 quartz sheet contains a large amount of hydroxyl groups (2000ppm), and has excellent UV transmission Performance, especially in the short-wave ultraviolet region, the transmission performance of JGS1 quartz glass sheet is far superior to all other glasses.
Not only do we have the following uv products in stock and can order in large quantities, but also as a fused quartz plate supplier, you can contact us for customization with special specifications:
JGS1 specifications: length x width x thickness (unit: mm)
1×1×0.5mm
1×1×0.8mm
1.5×1×0.5mm
1.5×1.5×0.8mm
2×1×0.5mm
2×1.5×0.8mm
2×2×1mm
4×1×0.8mm
4×1.5×0.8mm
4×2×0.8mm
Parameter
| property | typical values |
| diameter | 10mm-600mm |
| length | 10mm-1000mm |
| width | 10mm-1000mm |
| thickness | 0.5mm-60mm |
| color | clear/transparent |
| Sio2 | ＞99.9% |
| density | 2.2×10³kg/m² |
| moths hardness | 5.3~6.5(moths scale) |
| compressive strength | ＞1.1×109 pa |
| coefficient of thermal expansion | 5.5×10-7cm/cm℃ |
| the temperature for a short time | 1200℃ |
| the temperature for a long time | 1100℃ |
| softening point | 1730℃ |
| annealing point | 1250℃ |
| index of refraction | 1.4585 |
| transmittance rate | 85% |
Impurity content standards of different levels
|
Element |
Fe | Ca | Cu | Ti | Al | Na | Li | K | Mg | Ba | Ni |
| Level | ≤1.2 | ≤1.0 | ≤0.1 | ≤4 | ≤30 | ≤5 | ≤3 | ≤5 | ≤0.5 | ≤0.5 | 5 |
